www.finmat.com/Hock Ceilings

Sorry, your browser doesn't support Java(tm).

HOCK METAL ceilings are aesthetic decoration elements for the use in offices, department stores, schools, hospitals, railway stations, and also in exterior walkways, passages and pedestrian tunnels.
A wide variety of sizes of square and rectangle tiles, perforated or plain, surface finishes in different colours enables the designer to create the optimum synthesis of interior design and function according to individual requirements.

Different colour configurations for special effects including pre-coloured aluminium and high grade steel are available.
Our technical specialists will advice building contractors on construction details and assist in the solution of design detail problems.
Hock Metal Ceilings can be combined with other construction elements or provide in itself a performance-activated unit.
Different surface perforation patterns of 6 - 40% open area are available.
Hock Metal pan ceilings are highly effective sound-absorbing elements.
Hock Metal ceilings are non-combustible as a complete construction unit. In accordance to the latest provisions of Fireproofing Standard DIN 4102.

Brief View of Products (Contact us for more details)
	SYSTEM CL	Clip-in System Concealed Installation : The upturned edges of the tiles are provided with pips that snap into clip-in profile when tile is inserted. Removal of the tiles is best accomplished with the special hook which is inserted in the gap of two tiles. The suspension system consists of the clip-in profiles which are either suspended directly from the ceiling soffit or - if necessary - additionally supported by means of cross profiles.
	SYSTEM ACL	Clip-in System Concealed Installation : The upturned edges of the tiles are provided with pips that snap into the clip in profile when the tile is inserted. Tongues on the both ends of one side of the tile keep it fixed in the profile and when opening, the tile swings down. This construction guarantees an easy access to the ceiling void. The suspension system consists of the clip-in profiles which are suspended directly from the ceiling soffit and are additionally supported by cross profiles.
	SYSTEM 200	Lay-in System Exposed Installation : All sides of the tiles have Z-shaped edges for laying on the visible cold-rolled T-profiles in 15 or 24 mm width. Surface in standard colour RAL 9010. Surface structure : smooth, free floating. RAL colours are also available. Hot dip galvanized steel 0,63 mm thick.
	SYSTEM 250	Lay-in System Exposed Installation : All four sides of the tiles are bent with flanges of 1.5 mm height (same as thickness of T-profile) for laying on the visible cold-rolled T-profiles 24 mm width of galvanized steel. Surface in standard colour RAL 9010. Surface structure : Smooth, free floating. RAL colours are also available. Hot dip galvanized steel 0,5 and 0,63 mm thick.
	System 300	Lay- in System - Linear Grid Profile Exposed Installation : C-shaped profiles in variable width from 50 mm to 500 mm are suspended parallel to the axle by means of nonius hangers and suspension with V-bracing. The profiles are either of galvanized steel or aluminium having the same surface as the rectangular tiles. The tiles are produced in variable width from 200 to 1400 mm and up to a length of 3000 mm (length: module minus profile width) with Z-shaped flanges on the front sides for the laying on the profiles.
	SYSTEM 400	Corridor Systems : Rectangular tiles with different flanges for corridor ceilings are self supporting up to a length of 3000 mm at various widths of 200 mm to 1400 mm. RAL colours are also available. Hot dip galvanized steel 0,63 mm thick. Surface Structure : Smooth, free floating. Polyester Powder coating approx. RAL 9010.
	SYSTEM SPS	Lay-in System - Special Ceilings Section Exposed Installation :C-shaped profiles are suspended crosswise by means of hangers for V-bracing or by means of nonius hangers (upper and lower part) according to the requirements of the general proportion of the building. The cross profiles are Z-shaped for mounting the tiles. 4 trapezoid tiles with Z-shaped flanges on the front are screwed together to a unit and mounted on the profiles. The square opening in the middle is closed by a tile which is mounted on the trapezoid tiles or a square light fitting is provided.