System SP-S |
 |
 |
Lay-in-System- special
ceiling section Exposed Installation |
Material |
Surface of tiles: |
| C-Shaped profiles are suspended crosswise by means of hangers for V-bracing or by means of nonius hangers (upper and lower part) according to the requirements of the general proportion of the building. The crossed profiles are Z-shaped for mounting the tiles. 4 trapezoid tiles with Z-shapes flanges on the front are screwed together to a unit and mounted on the profiles. The square opening in the middle is closed by a tile which is mounted on the trapezoid tiles or a square light fitting is provided. | Hot dip galvanised steel. Zinc coating on both sides 120 gr/m2. Class : St 02 150 8 B. Phosphated and chromated Or aluminium. Thickness to depend on the size, the width and the length. Shop drawings from our designers can be provided upon request. |
Polyester-powder coating approx. |
|
|
 |
Execution: |
   |
Sizes of tiles: |
| Plain or perforated L 2516 diameter 2,5 mm open area approx 16% L 2520 diameter 2,5 mm open area approx 20% L 1622 diameter 1,6 mm open area approx 22% other perforations are available |
C-shaped profiles |
